TENAX-7R is the finest product available for the permanent assembling of plastic models.

Image	Description	Part #	Our Price
	Glue Kit - includes 1 oz. bottle of Tenax 7R, applicator, filler bottle and MicroBrushes	TEN-7RKit	$17.99
	Tenax 7R Glue, 1 oz. bottle	TEN-7R	$4.49
	Replacement Filler bottle	TEN-Filler	5.99
	Replacement Aplicator pipette "Touch-n-flow"	TEN-App	6.25
	Cyanoacrylate (CA) Adhesive Applicator Tool	CRU-805	6.25
	Fill-N-Clean	CRU-720	11.96
	Gentle Touch Plastic Hemostat	CRU-5001	6.39
	Gentle Touch Plastic Hemostat 3 pack	CRU-5002	15.99
	Touch-N-Flow System	CRU-7000	13.45
	Funnel	CRU-7017	1.99
	Plastic Sanding Needles -- Coarse 150 Grit pkg(8)	CRU-APA401	4.79
	Plastic Sanding Needles -- Medium 240 Grit pkg(8)	CRU-APA402	4.79
	Plastic Sanding Needles -- Fine 320 Grit pkg(8)	CRU-APA403	4.79

The following information will help you to use TENAX-7R and the Space Age Construction Kit to their fullest advantage.

To assemble your model you must remember you will be welding, not gluing. This means that in order for your TENAX-7R to work the parts must be in place and touching. Then you simply touch the seam with your TOUCH-N-FLOW applicator. The TENAX-7R will fuse the seam by capillary action. This will actually weld the parts. Now hold the parts for approximately 10 seconds or until you have a firm bond. The complete weld will take about five minutes to cure but you are able to continue before a full cure is complete.

That is all there is to it.

The Touch-N-Flow system is very simulare to the Tenax system above. The kit dose not include the Microbrushs, but has a 2oz bottel of the Plast-I-Weld

Click here for Microbrushs

TENAX-7R Plastic Welder	Using the TOUCH-N-FLOW applicator is very easy. Fill it; tip it down, touch a surface and it flows, tip it back up and it stops. When it is not being used keep the tip elevated so it will not drip.	EASY-FILL Filler Bottle
TOUCH-N-FLOW Applicator Tip. Pipette is approximately 6" in length.
Flex-I-File Applicator is approximately 6" in length. The C/A Applicator will pick up small drop of C/A Cement on its tip. Apply the glue where needed. For clean up just wipe off the tip. The Fill-N-Clean base is a heavy base that will allow you store your Fill-N-Clean bottle, and two Applicators. It also has horizal storage for the applicators.